Longitudinal Hydraulic, Crossfeed Motorized And Rapid Up/Down Motorized.
ASD:
Fully Automatic In 3 Axis (X. Y. Z.) With Stepping Motor For Downfeed, And AC Motor For Rapid Up/Down.
SPECIFICATIONS
MODEL
ESG-3A1632
DESCRIPTIONS
Table Size
406x813mm(16x32")
Max.grinding length
Longitudinal
813mm(32")
Max.grinding width
Crosswise
410mm(16")
Max. distance from table surface to spindle centerline
Standard column:630mm(24 3/4"); Optional high column:720mm(28 5/16")
Standard magnetic chuck size
400x800mm(15 11/16x31 1/2")
Longitudinal movement of table
Max. travel, hydraulic
890mm(35")
Max. travel, manual
930mm(36 1/2")
Max. travel, infinitely variable
60HZ,5-25m/min,50HZ,5-20m/min
Cross transverse travel
Auto transverse increment
1~25mm(0.04"-1")
Max. auto transverse travel
430mm(17")
Max. manual transverse travel
460mm(18")
Handwheel per revolution
5mm(0.2")
Handwheel per graduation
0.02mm(0.001")
Wheelhead vertical infeed
Automatic in feed
0.001-0.04mm(0.00005-0.002")
Step feed (Jog)
0.001mm(0.00005")
Rapid travel, Approx
150mm/min
Slow travel, Approx
6mm/min
Handwheel revolution
1mm(0.05")
Handwheel graduation
0.005mm(0.0005")
Grinding spindle drive
Speed
60HZ,1750R.P.M.;50HZ,1450R.P.M.
Power rating
Standard:5HP; Optional:7 1/2HP,10HP
Standard grinding wheel
Diameter
355mm(14")
Width
50mm(2")
Bore
127mm(5")
Hydraulic motor
Power rating
3.0HPx6P
Crossfeed motor
Power rating
80Wx6P
elevating motor
Power rating
1/4HPx6P
Floor space
Total space required
3290x2200x2050mm(130x87x81")
Weights
Net weight, Approx.
3400KGS(7480LBS)
Gross weight, Approx.
4000KGS(8800LBS)
Rated power, Approx
8 1/2HP(Spindle motor:5HP)
11HP(Spindle motor:7.5HP),
13 1/2HP(Spindle motor:10HP)
Packing dimensions
L x W x H
2800x2290x2200mm(110x90x88")
NOTE: The manufacturer reserves the right to modify the design, specifications, mechanisms, etc., to improve the performances of the machine without notice. All the specifications shown above are just for reference.
General Features:
1.COLUMN:
Enlarged, honeycomb-ribbed column especially suitable for heavy duty grinding.
2.CONSTRUCTION:
Construction of table, saddle and base is casted with high grade iron, strongly ribbed.
3.SPINDLE:
Enlarged spindle set is supported by four preloaded precision angular contact Ball bearings for heavy duty.
4.SLIDEWAYS:
Vertical, cross (double vess) and longitudinal (one vee &one flat) slideways are coated with Turcite-B, provides stable movement and durable accuracy.
5.AUTOMATIC CONTINUOUS LUBRICATION SYSTEM:
All slideways and screws are fully oiled by automatic continuous lubrication system to eliminate wears on slideways & screws.
6.CROSS FEED:
Ball screw for cross travel, powered by AC motor.
7.HYDRAULIC TABLE:
Table speed ranges 5-25m/min. With rack and pinion table drive for hand operation.
8.PROXIMITY SWITCH:
Provide built-in-type (hidden) proximity switch, features safe and easy operation.
9.TABLE SPEED CONTROL:
Presettable hydraulic table speed control allows operator to pre-set speed rate, enable to get same speed rate when engaging hydraulic table every time.
10.HAND WHEELS:
Zero-setting slip-ring with vernier on vertical handwheel, and vernier on crossfeed handwheel.
Полу-автоматични 
